M O N I T O R S


Standard Monitors

The Standard monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint.

Features include: user selectable set point, visual LED alarm when values go above (for pH) or below (for EC and TDS) the set point and manual calibration. All these instruments run on a 12V adapter so there's no need to worry about failed batteries.


Cal-Test Monitors

Milwaukee's Cal-test instruments allow you to continuously monitor pH, EC or TDS values directly in your reservoir.

The Cal-test button will show you when to calibrate your instrument
  • Green light = no need to calibrate
  • Red light = calibration needed
All models are supplied complete with a professional electrode/probe, 1 sachet calibration solution (2 sachets for pH), 5 sachets Cal-test solution, instruction manual, screwdriver for calibration and a 12V power adapter.

 
Standard  Monitor  Specifications
Application Range Models
pH 0.0 - 14.0 pH SMS110
pH 0.0 - 14.0 pH SMS120
EC 0.00 - 10.00 mS/cm SMS310
TDS 0 - 1999 ppm SMS410a
Cal-Test  Monitor  Specifications
Application Range Models
EC 0.00 - 9.99 mS/cm SMS315
TDS 0 - 1990 mg/L (ppm) SMS415